iTach Flex Wi-Fi - Top View (Learning Window and Reset Button)

More Views

iTach Flex Wi-Fi

Price: $90.97
Availability:In stock
SKU:FLEX-WF

Quick Overview

The iTach Flex Wi-Fi provides wireless connectivity to infrared (IR) or serial (RS232) components with a device the size of a USB memory stick. Configure your iTach Flex Wi-Fi with IR emitters and IR blaster, or connect the universal serial cable to control all of your components.

* Required Fields

Price: $90.97

Product Description

The iTach Flex Wi-Fi provides wireless connectivity to infrared (IR) or serial (RS232) components with a device the size of a USB memory stick. Configure your iTach Flex Wi-Fi with IR emitters and IR blaster, or connect the universal serial cable to control all of your components.

Winner of the CES Innovation Award for Home Networking 

There is a newer version of this product. The Roomie Blaster provides the functionality of this product and does not require the Roomie Service with Roomie 3.0 or later.

Seamlessly control infrared or serial devices over a network and the Internet. The iTach Flex Wi-Fi provides a new level of automation and control flexibility without depending on line of sight, batteries, careful coffee table positioning, or flaky protocols. This product is certified for use with Roomie to provide compatibility with all supported infrared and serial devices for locations without a direct wired Ethernet port to the local network, and an available Wi-Fi network.

The iTach Flex includes the Global Port. Connect either a single IR emitter, a single IR blaster, or the new Tri-port Cable allowing up to 3 discrete emitters or 2 emitters and 1 blaster, or even connect the new Flex Link Serial Cable that can be automatically switched between a null modem cable type or a straight through cable. The same iTach Flex Wi-Fi can control any of these scenarios simply by swapping the connector on the Global Port.

The IR blaster can control many devices by placing the blaster in front of the set of devices to be controlled. IR emitter cables are attached directly to the infrared receiver window of devices to be controlled. The 3 Tri-port Cable IR ports are discrete – commands may be sent to each port separately from Roomie even allowing control of multiple boxes of the same type.

Purchase of the Roomie Service inside Roomie is required for infrared device support with this adapter. Please note that any iTach not purchased from the Roomie Store may not be compatible.

Tech Specs

Power Input

5V DC 90-230V Power Adapter Included
USB micro adapter cable included
Compatible with standard USB chargers

Setup

Integrated Web Server for Easy Configuration
Supports Roomie Automatic Discovery (Requires Roomie 1.8+)
AdHoc Wi-Fi for peer-to-peer setup
WPS (Wi-Fi Protected Setup)
One button connection takes just moments

Network Connection

DHCP and Static IP
802.11g Wi-Fi with on-board antenna
WPA/WPA2 (TKIP, AES & Mixed)
WEP 64 bit and 128 bit
WPS
Network upgradable firmware
Supports multiple simultaneous connections

LED Indicators

Power and connectors to indicate activity and status

IR Output

Global Port supports these IR configurations:
  • iTach Flex Infrared Emitter Cable
  • iTach Flex Link Blaster Cable
  • iTach Flex Link 3 Emitter Cable
  • iTach Flex Link Dual Emitter Blaster Cable
  • iTach Flex Link Tri-port Cable: Emitter+Emitter+Emitter
  • iTach Flex Link Tri-port Cable: Emitter+Emitter+iTach Flex Link Blaster
GC-CGX Xantech Compatibility Cable may be swapped into any of the above configurations.
Emitters and/or Blaster cables must be selected under Connectors above. The Flex does not include any connectors if not selected.
All IR Outputs are Discrete and Selectable with a 20 - 500 KHz range.

Serial

Global Port to Male DB9 with Cable Type Switching
Switch Between Null/Straight Cable Types
600 baud to 115.2 Kbps
Odd, Even, and None parity settings
Bi-directional with hardware RTS/CTS flow control

IR Learning

Includes Roomie compatible IR Learning Receiver
20 - 200 KHz

Mounting Dock

Allows for simple installation in any location
Included mounting dock allows Flex units to click in and out as needed

Physical Dimensions

Dimensions (LxWxH): 2.55″ x 1.22″ x 0.48″
Weight: 0.7 oz.

Certifications

FCC (Part 15, Class B), C-tick, CE
RoHs compliant

Warranty

Two year limited warranty
Support available via Global Caché

iTach Setup Diagram

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.